Kraun PCI 32-bit/Wi-Fi Manual de usuario descargar pdf (Pagina 11)

www.kraun.it11

User’s Manual

3.7 Statistics

Click the tab Statistics as shown in Figure 3 12 to view the traffic statistics

about the connection. Click the Reset to refresh the information.

Figure 3 14

3.8 Wi-Fi Protect Setup

Click the tab Wi-Fi Protected Setup as shown in Figure 3 15, select different

way to configure the adapter for Wi-Fi network.

Figure 3 15

-> Note:

The Wi-Fi Protected Setup function takes effect only when the adapter and

the AP (the adapter wants to connect) must support the Wi-Fi function

first. Or else, the adapter can’t connect the AP.

3.8.1 PIN

Step 1: Select the PIN (shown in Figure 3 15).

Step 2: Click the Refresh button, and then the searched AP will display

in the screen (shown in Figure 3 16). Select the AP name as you need,

and click Select button.

Figure 3 16

Step 3: After that, the PIN Code displays on the screen (shown in Fig-

ure 3 17). Now, you should enter the pin code into your AP.

Figure 3 17

Step 4: Finally, the adapter will create the profile and connect to the

AP automatically; You can see the status screen as follow. This is a

new connection for Wi-Fi network.

Figure 3 18

1 2 ... 6 7 8 9 10 11 12 13

Sin comentarios

Kraun PCI 32-bit/Wi-Fi Manual de usuario Pagina 11